International Journal of Innovative Scientific & Engineering

Technologies Research 14(3):291-299, July-Sept, 2026

 © SEAHI PUBLICATIONS, 2026    www.seahipublications.org       ISSN: 2360-896X

 

 

DOI:10.5281/zenodo.23118271

Environmental Monitoring And Data Logging For Precision Irrigation Using An Embedded Sensor Platform

 

Sule Ojonugwa Samuel¹, Yahaya Yusuf² & Musa Momoh¹

 

¹ Department of Physics, UsmanuDanfodiyo University, Sokoto, Nigeria
² Department of Physics, Federal University, Gusau, Zamfara State, Nigeria

 

ABSTRACT

Efficient irrigation management requires reliable information about environmental conditions that influence soil-water dynamics and crop water requirements. This study developed and evaluated a low-cost embedded sensor platform for environmental monitoring and time-stamped data logging to support precision irrigation. The platform integrated an Arduino Uno microcontroller with a DS18B20 soil-temperature sensor, DHT22 ambient temperature and relative-humidity sensor, DS3231 real-time clock, 16 × 2 I²C LCD and HC-05 Bluetooth module. The system was designed to continuously acquire environmental measurements, assign timestamps, display sensor readings and facilitate wireless access to recorded information. Sensor accuracy, temporal environmental variations, timestamp performance and wireless communication were evaluated over a seven-day experimental period. Soil-temperature measurements were acquired at 10-minute intervals. Soil temperature increased from 23.1 °C at 06:00 to 30.2 °C at 15:00, while ambient temperature increased from 24.6 °C to 33.5 °C. Relative humidity decreased from 82% to 46% during the same period. The DS18B20 produced an average absolute error of 0.32 °C, while the DHT22 showed deviations of approximately ±0.6 °C for temperature and ±2.5% for relative humidity compared with reference measurements. The DS3231 maintained timestamp accuracy within approximately ±2 s. Bluetooth communication achieved greater than 98% transmission success at approximately 10 m, with average latency below 300 ms. The findings demonstrate the feasibility of using low-cost embedded sensors for continuous, time-referenced environmental monitoring. The developed platform provides a practical foundation for precision irrigation research, environmental trend analysis and future development of data-driven irrigation models.

Keywords: Precision irrigation; Environmental monitoring; Internet of Things; Soil temperature; Relative humidity; Data logging